By cable
Requires Chrome or Edge on a computer, and a USB-C cable that carries data.
Plug Glimly into the computer, open the Connect page and click Choose Glimly. All settings, WiFi setup, updates and password removal are available by cable.
To update, click Check for updates, then Install update. Check for updates is on the Device tab, or below the WiFi setup when Glimly isn’t on WiFi. Keep the cable connected until Glimly restarts, in under a minute. Settings and WiFi are kept. Install again reinstalls the current version.
“Glimly needs its firmware” or “Glimly needs an update”
Click Install Glimly and keep the cable connected. If it stops part-way, click Install again.
“Glimly didn’t answer on the cable”
Hold Glimly’s button for 10 seconds to restart it, then choose it again.